153
www.tsdistributors.com
CATALOG / 11
CONCRETE ANCHORS
Tapper™
Concrete Screw 
Anchor
ITEM #
SIZE
RA5005
5/16" x  1-1/2"
RA5010
5/16" x  2-3/8"
RA5015
3/8" x  1-7/8"
RA5020
3/8" x  3"
RA5025
1/2" x  2-1/4"
RA5030
1/2" x  3"
RA5034
1/2" x  4"
RA5035
5/8" x  2-1/2"
RA5040
5/8" x  4-1/4"
RA5045
5/8" x  5-3/4"
RA5050
3/4" x  2-1/2"
RA5055
3/4" x  4-1/4"
RA5060
3/4" x  6-1/4"
ITEM # 
SIZE
RA7400
1/4" x  1-3/4"
RA7402
1/4" x  2-1/4"
RA7404
1/4" x  3"
RA7410
3/8" x  2-1/4"
RA7412
3/8" x  2-3/4"
RA7414
3/8" x  3-1/2"
RA7416
3/8" x  5"
RA7420
1/2" x  2-3/4"
RA7422
1/2" x  3-3/4"
RA7423
1/2" x  4-1/2"
RA7424
1/2" x  5-1/2"
RA7426
1/2" x  7"
RA7430
5/8" x  3-1/2"
RA7432
5/8" x  4-1/2"
RA7434
5/8" x  6"
RA7436
5/8" x  7"
RA7438
5/8" x  8-1/2"
ITEM #                                        SIZE
RA3762                        1/4" x  1-1/2" 
RA3764                              1/4" x  2" 
RA3768                              1/4" x  3"
ITEM #           SIZE                HEAD BOX  Q TY.
RA2724 1/4” x  2-1/4” Hex  Head
100
RA2728 1/4” x  3-1/4” Hex  Head
100
RA2732
1/4” x  4”
Hex  Head
100
RA2764 1/4” x  2-1/4” Star Flat Head
100
RA2768  1/4” x  3-1/4” Star Flat Head
100
RA2772    1/4” x  4”     Star Flat Head    100
RA2776     1/4” x  6”    Star Flat Head     100
Wedge Expansion 
Anchor
» Designed for consistent 
performance in cracked 
and uncracked concrete
» No other fastener needed 
» A one-piece anchor bolt
made of low carbon steel
Sleeve Expansion 
Anchor
» A single unit sleeve anchor 
made of carbon steel 
» Sleeve has 360° contact 
area and reduces concrete 
stress
» High-low thread design
» No hole spotting required
» Perma-Seal™ coated carbon steel
Short Spike
» One-piece anchor
» Zinc electroplated
(meeting ASTM B-633) 
» High grade carbon steel
» Tamper resistant
DRILL BIT 
DIA
Use in:  Solid Concrete, Grout-filled 
Block, Hollow Concrete Block, Brick, 
Mortar
Use in: Solid Concrete, Stone (may be 
suitable), Grout-filled Block (may be 
suitable)
3.  Tighten
4.  Expansion will occur
1.  Position fixture
and drill hole
2.  Drive anchor into
hole until nut and
washer are flush
with fixture
1.  Position fixture and
drill hole
2.  Insert anchor into hole 
3.  Lightly tap
until flush
with fixture
Uses: Window Installations, Storm Shutters, 
Interior Hand Rails, Interior Lighting Fixtures
4.  Tighten
5.  Expansion will occur
Hex Head
Torx
Screw is the anchor, no need for 
additional mounting hardware

View this content as a flipbook by clicking here.