61
www.tsdistributors.com
CATALOG / 11
ALL-O-MATIC VD-1 
Single Channel Loop 
Detector
Vehicle Plug-In Loop 
Detector
ITEM #
DESCRIPTION
GTZEG169
Eagle Loop Detector
» Use with all Eagle
operators using
Eagle Diamond Board
» Plugs into every Eagle
Diamond Board
» 10 - 30 VAC/DC - 20 mA maximum
» Loop Size: Any size in-ground
inductive loop from 20 to 1500 µH.
 ITEM#
DESCRIPTION
GTADSP7Fail Safe Loop Detector
ITEM#
DESCRIPTION
GTAL48
4 ft. x  8 ft. Size
GTAL812
8 ft. x  12 ft. Size
Micro Loop Detector
» For solar 
powered gate 
installations
» Available in 
fail-secure and
fail-safe models
» Operates on any voltage from 10 to 
30 volts AC or DC
» Draws approximately 35 milliamp of 
current with no vehicle on the loop
ITEM #
DESCRIPTION
GTADSP40
Diablo Loop Detector
Loop 
Detector
» For Chamberlain Elite 
circuit board
» Front panel reset
» 12.4” h x 0.8” w x 2.25” d
» 10-30 volts AC/DC, 20 mA
» Solid state detect and fail outputs 
» No set up. No tuning. No adjustments
Preformed Loops
» 50 ft. lead
» For Use under 
concrete or 
other pave-over 
applications
Stocked in 4’ x 8’ and 8’ x 12’. Other 
sizes available upon request.
ITEM#
DESCRIPTION
GTAMVPDTEKMulti-Voltage
D-Tek Loop 
Detector
» Prevents gate from
closing when
vehicle present
» 11 pin harness
included 
» Free exit device
ITEM #
DESCRIPTION
GTADML9LP
Mini Loop Detector
DML-9LP
Mini Loop Kit
100
» For solar powered applications
» Will not interfere w/other loop
dectectors
» Fail-secure operation
» 10 to 30 volts AC/DC
» Dimensions 1.52” H x 2.9” W x 1.56” D
Note: Never Use a
Fail-Secure Detector on a Safety Loop
Kit Includes:
DML-9LP  Detector
Drop In Loop w/100 Lead In 
HY5B 2.0 LOOP 
DETECTOR 
Works with All
HySecurity Operators 
ITEM #
DESCRIPTION
GTSMX4621                  Loop Detector
Control board offers four Hy5B sockets 
for free exit, inside obstruction, outside 
obstruction, and center loop function
» Smart Touch technology auto tunes 
each detector to its own frequency, 
preventing cross talk between loops
» Compact design, 1-3/4 x 3-5/8 inch 
ITEM #
DESCRIPTION
GTTVD1       Plug In Loop Detector
» Plug in loop detector
» Used with the Allomatic LPR-2
loop rack (included with Allomatic operators)
Voltage Range:   12 VDC - 240 AC
ITEM#
DESCRIPTION
GTAH11P
11 Pin Wiring Harness
11-Pin Wiring 
Harness
Pin Wiring
ness
11-Pin 
Harness
» Works with most loop detector 
brands requiring an 11-pin harness
ACCESS CONTROL ACCESSORIES

View this content as a flipbook by clicking here.